MOLYBDENUM DISULFIDE |
|
|
WATER RESISTANCE |
|
HIGH ADHESION |
• stable operation in dusty conditions
• anti-corrosion protection
• vibration resistance
Operating temperature range -30..+120
sliding bearing | support bearing | sliding guides |
The Elit M is used for lubricating sliding guides, low-speed high-loaded bearings of metallurgical, mining and concentrating equipment, transport vehicles, construction and special machines.
It is suitable for lubrication of open heavy-loaded gears, different friction units, subject to impact loads.
This grease is appropriate for hinges of equal angular velocities of passenger cars, spline joints of cardan shafts, bushing-finger, pin and ball-joint joints, as well as coupling devices of trucks and special equipment.
The Elit-M EP0 and ЕР1 can be used in the centralized lubrication systems.
The grease is produced on the basis of medium-viscosity basic mineral oil and lithium-calcium soap base. These series greases contain molybdenum disulfide, corrosion inhibitors, extreme pressure and other additives in its content.
Cartridges 0.37 kg
Bucket 18 kg
Barrel 180 kg
The products of ARGO company at usual operation conditions and with the observation of personal hygiene rules are not dangerous for health. The product is not highly inflammable and not toxic. The maximum conservation of operational qualities is achieved during storage in a cool premise in a hermetic packing. Avoid the environment pollution; do not discharge the product into sewage or waste water. For details of waste grease disposal, please contact the organizations certified in this field. For additional information, please contact the ARGO company representatives.
Characteristic |
Method |
EP0 |
EP1 |
EP2 |
Base |
- |
Li-Ca |
||
MoS2 content, % |
|
3 |
||
Operating temperature range, ºС |
- |
-30..+120 |
-30..+120 |
-30..+120 |
Grease classification |
DIN 51502 |
KPF0K-30 |
KPF1K-30 |
KPF2K-30 |
Grease color |
Visually |
Dark-grey |
||
NLGI consistency index |
DIN 51 818 |
0 |
1 |
2 |
0.1 mm penetration |
DIN ISO 2137 |
355-385 |
310-340 |
265-295 |
Basic oil viscosity at 40ºС, mm2/s |
DIN 51562-1 |
220 |
220 |
220 |
Drop point, ºС |
DIN ISO 2176 |
- |
170 |
170 |
Welding load, N |
DIN 51350 |
2930 |
2930 |
2930 |
Multi-purpose heat-resistant lubricant based on a complex lithium thickener and high-performance EP additives. Contains fine graphite.
Universal, water-resistant, automotive lubricant. The operating temperature range is from -30 to +160°C.
Low-temperature grease for centralized lubrication system. Operating temperature from -40 °C...+120 °C
Special grease with MoS2 for vehicles, construction and special equipment, metallurgical and mining equipment. Operating temperature from -30 °C...+120 °C
Semi-synthetic automotive grease ARGO Elit X Operating temperature from -30°C...+160°C