ORDER

Elit M

	MOLYBDENUM DISULFIDE provides protection • in case of insufficient amount of grease • in conditions of heavy pollution • at extremely high loads; effectively prevents increased wear, fretting corrosion, the burrs formation; operation in vacuum conditions.
	WATER RESISTANCE withstands water contact
	HIGH ADHESION prevents the grease from draining off the surfaces, keeps the grease in the lubrication zones for a long time

• stable operation in dusty conditions
• anti-corrosion protection
• vibration resistance

Operating temperature range -30ºC...+120ºC

Product application


sliding bearing	support bearing	sliding guides

The Elit M is used for lubricating sliding guides, low-speed high-loaded bearings of metallurgical, mining and concentrating equipment, transport vehicles, construction and special machines.

It is suitable for lubrication of open heavy-loaded gears, different friction units, subject to impact loads.

This grease is appropriate for hinges of equal angular velocities of passenger cars, spline joints of cardan shafts, bushing-finger, pin and ball-joint joints, as well as coupling devices of trucks and special equipment.

The Elit-M EP0 and ЕР1 can be used in the centralized lubrication systems.

Ingredients

The grease is produced on the basis of medium-viscosity basic mineral oil and lithium-calcium soap base. These series greases contain molybdenum disulfide, corrosion inhibitors, extreme pressure and other additives in its content.

Type of packaging

Cartridges 0.37 kg
Bucket 18 kg
Barrel 180 kg

Environment protection and safety

The products of ARGO company at usual operation conditions and with the observation of personal hygiene rules are not dangerous for health. The product is not highly inflammable and not toxic. The maximum conservation of operational qualities is achieved during storage in a cool premise in a hermetic packing. Avoid the environment pollution; do not discharge the product into sewage or waste water. For details of waste grease disposal, please contact the organizations certified in this field. For additional information, please contact the ARGO company representatives.

Characteristic	Method	EP0	EP1	EP2
Base	-	Li-Ca
MoS2 content, %		3
Operating temperature range, ºС	-	-30..+120	-30..+120	-30..+120
Grease classification	DIN 51502	KPF0K-30	KPF1K-30	KPF2K-30
Grease color	Visually	Dark-grey
NLGI consistency index	DIN 51 818	0	1	2
0.1 mm penetration	DIN ISO 2137	355-385	310-340	265-295
Basic oil viscosity at 40ºС, mm²/s	DIN 51562-1	220	220	220
Drop point, ºС	DIN ISO 2176	-	170	170
Welding load, N	DIN 51350	2930	2930	2930

--!>

FOUND OUT MORE

Elit M

Special grease with MoS2 for vehicles, construction and special equipment, metallurgical and mining equipment. Operating temperature from -30 °C...+120 °C