TermoLub S Copper
|
|
CALCIUM SULFONATE THICKENER COMPLEX |
|
|
HEAT RESISTANCE |
|
|
WATER RESISTANCE |
|
|
THE COPPER IN THE COMPOSITION protects the surfaces from welding |
|
|
CHEMICAL NEUTRALITY TO COPPER |
!!! DO NOT USE FOR LUBRICATION OF ROLLING BEARINGS!
Operating temperature range -20..+1100
Product application
TermoLub S Copper paste is specially designed for lubricating cartridges and bushings of pneumatic and hydraulic drills and hammers, as well as other mechanized impact tools manufactured by companies such as Krupp, Montabert, Rammer, Indeco and others, with a hammer weight from 75 to 6600 kg, it is also recommended for combined shears, scrap cutting shears, shredders, multigraphers, concrete crushers, etc.
TermoLub S Copper paste not only protects key components of mechanisms, but also increases the service life of both tools and bushings, significantly slowing down their wear and preventing jamming.
Ingredients
Mineral oil, thickener complex of calcium sulfonate, copper, graphite, extreme pressure (EP), anti-wear (AW), antioxidant and anticorrosive additives
Type of packaging
Cartridges 0.37 kg
Bucket 18 kg
Barrel 180 kg
Environment protection and safety
The products of ARGO company at usual operation conditions and with the observation of personal hygiene rules are not dangerous for health. The product is not highly inflammable and not toxic. The maximum conservation of operational qualities is achieved during storage in a cool premise in a hermetic packing. Avoid the environment pollution; do not discharge the product into sewage or waste water. For details of waste grease disposal, please contact the organizations certified in this field. For additional information, please contact the ARGO company representatives.
|
Characteristic |
EP 2 |
|
Base |
Calcium Sulfonate Complex |
|
Operating temperature range, ºС |
-20...+1100 |
| Antifriction additives | Copper, graphite |
|
Grease color |
Brown |
|
NLGI consistency index |
2 |
|
0.1 mm penetration |
265-295 |
|
Basic oil viscosity at 40ºС, mm2/s |
370 |
|
Drop point, ºС |
250 |
| Corrosion effect on the copper plate | 1a |
|
Welding load, N, not less |
4136 |
FOUND OUT MORE
TermoSint 1500
High-temperature grease with a drop-off temperature of +265ºC. Operating temperature from -20 °C...+180 °C
TermoSint 1000 M
High-temperature grease with a drop-off temperature of +265ºC. Operating temperature from -20 °C...+180 °C
TermoPlex 1000 OG
Water-resistant lubricant for open gears,. The operating temperature range is from -10 to +160⁰C.
Elit Moly
Multifunctional lubricant with molybdenum disulfide Operating temperature from - 30°C...+140°C
TermoPlex 460 PTFE
Grease for telescopic systems. Operating temperature range from -20 to +160 ⁰C.
TermoLub S460
Grease for equipment operating under significant waterlogging, high mechanical loads and temperatures up to +180 ° C.
TermoLub S Copper
Specialized paste for pneumatic and hydraulic hammers, withstands critical loads and temperatures up to + 1100 ⁰C.
TermoLub S220
High temperature grease for gearboxes with leakage problems. Operating temperature from -20 °C...+180 °C
TermoPlex 2500 OG
Grease for the protection of mechanisms operating under very high pressure. The operating temperature range is from +5 to +1600 °C.
TermoPlex GNB
All-seasons lubricant for threaded connections of drilling rods of horizontal drilling rigs. Operating temperatures from -30 to + 600⁰C
TermoLub S460PM
Grease for paper-making machines operating at extremely high temperatures up to + 200 °C and significant waterlogging. The operating temperature range is -40...+200 °C