ORDER

TermoMax

	MOLYBDENUM DISULFIDE provides protection • in case of insufficient amount of lubricant, • in conditions of heavy pollution • at extremely high loads; effectively prevents increased wear, fretting corrosion, the formation of burrs; works in vacuum conditions
	WATER RESISTANCE withstands exposure to cold and hot water
	MECHANICAL STABILITY prevents grease leaks and guarantees high sealing capacity

• stable operation in dust and vibration conditions
• anti-corrosion protection

Operating temperature range от -30ºС до +160ºС

Product application


low-speed bearings	sliding guides	open gears

ThermoMax is intended for mechanisms operating under critical and shock loads. Greases of this series are used for lubrication of high-loaded low-speed bearings, pin joints of transport, mining and construction equipment. ThermoMax grease has proven itself well when operating in heavily loaded open gears, sliding guides and other friction units.

Ingredients

Mineral oil, lithium complex thickener, molybdenum disulfide, extreme pressure (EP), anti-wear (AW), antioxidant and anticorrosive additives

Type of packaging

Cartridges 0.37 kg
Bucket 18 kg
Barrel 180 kg

Environment protection and safety

The products of ARGO company at usual operation conditions and with the observation of personal hygiene rules are not dangerous for health. The product is not highly inflammable and not toxic. The maximum conservation of operational qualities is achieved during storage in a cool premise in a hermetic packing. Avoid the environment pollution; do not discharge the product into sewage or waste water. For details of waste grease disposal, please contact the organizations certified in this field. For additional information, please contact the ARGO company representatives.

Characteristic	Method	EP0	EP1	EP2	EP3
Base	-	Li-Complex
MoS2 content, %	-	5
Operating temperature range, ºС	-	-30..+160	-30..+160	-30..+160	-30..+160
Grease classification	DIN 51502	KPF0P-30	KPF1P-30	KPF2P-30	KPF3P-30
Grease color	Visually	Dark-grey
NLGI consistency index	DIN 51 818	0	1	2	3
0.1 mm penetration	DIN ISO 2137	355-385	310-340	265-295	220-250
Basic oil viscosity at 40ºС, mm²/s	DIN 51562-1	220	220	220	220
Drop point, ºС	DIN ISO 2176	нет нормы	250	250	250
Welding load, N	DIN 51350	3920	3920	3920	3920