ORDER

TermoPlex 100 PTFE

	ALUMINUM COMPLEX gives the lubricant operability in the presence of seawater, a high degree of protection against oxidation and corrosion, 100% protection from dust and dirt, resistance to thermal, structural and oxidative destruction, colloidal stability
	PTFE prevents "sticking" of metallic and non-metallic friction pairs, protects fluoroplastic components from premature wear
	SYNTHETIC BASE OIL higher oxidative stability, longer service life, low evaporation compared to mineral oils
	THERMAL REVERSIBILITY complete restoration of the properties of the lubricant after repeated overcoming of the drop-off temperature and subsequent cooling
	WATER RESISTANCE is not washed off by a hot water jet (loss of less than 3% at 79° C), is not afraid of seawater
	HIGH ADHESION prevents the grease from draining off the surfaces, keeps the grease in the lubrication zones for a long time

• effective protection against fretting corrosion
• increased load-bearing capacity
• minimum consumption

Operating temperature range -20..+200ºС

Product application


rolling and sliding bearings	clamping elements	sliding guides

Termoflex 100 PTFE lubricant is recommended for use in assemblies in which friction pairs are implemented: steel-steel, steel-plastic, plastic-plastic, steel-PTFE, etc.
The lubricant is particularly suitable for lubricating lathe clamps, it is used in assemblies, including those exposed to lubricants and coolants.

Ingredients

Mineral oil, thickener aluminum complex, PTFE, extreme pressure (EP), anti-wear (AW), antioxidant and anticorrosive additives

Type of packaging

Cartridges 0.37 kg
Bucket 18 kg
Barrel 180 kg

Environment protection and safety

The products of ARGO company at usual operation conditions and with the observation of personal hygiene rules are not dangerous for health. The product is not highly inflammable and not toxic. The maximum conservation of operational qualities is achieved during storage in a cool premise in a hermetic packing. Avoid the environment pollution; do not discharge the product into sewage or waste water. For details of waste grease disposal, please contact the organizations certified in this field. For additional information, please contact the ARGO company representatives.

Characteristic	EP2
Base	Aluminium Complex
Operating temperature range, ºС	-20..+200
Grease Classification	MLF2S
Grease color	Cream
NLGI consistency index	2
0.1 mm penetration	265-295
Basic oil viscosity at 40ºС, mm²/s	112
Drop point, ºС	220
Welding load, N, not less	4635

--!>

FOUND OUT MORE

TermoLit 3000

Universal industrial grease. Operating temperature from -20°C...+160°C

TermoPlex 460 PTFE

Grease for telescopic systems. Operating temperature range from -20 to +160 ⁰C.

TermoPlex 1500 OG

Grease for damaged open gears. The operating temperature range is from -10⁰C to +160⁰C.

TermoPlex 2500 OG

Grease for the protection of mechanisms operating under very high pressure. The operating temperature range is from +5 to +1600 °C.

TermoMax

Heat-resistant grease with molybdenum disulfide. Operating temperature from -30°C...+160°C

TermoPlex 1000 OG

Water-resistant lubricant for open gears,. The operating temperature range is from -10 to +160⁰C.

TermoSint 220

All-season, multifunctional synthetic grease of long service life, operating temperature from -40⁰C to +150⁰C

TermoSint 1000 M

High-temperature grease with a drop-off temperature of +265ºC. Operating temperature from -20 °C...+180 °C

Volt 1100 Paste

Electrically Conductive non-stick threaded Paste ARGO Volt 1100 Paste

Elit Moly

Multifunctional lubricant with molybdenum disulfide Operating temperature from - 30°C...+140°C

TermoLub S460PM

Grease for paper-making machines operating at extremely high temperatures up to + 200 °C and significant waterlogging. The operating temperature range is -40...+200 °C

Calcium HDS

Grease for articulated trunnions of vehicles, operating temperature -30..+120