ORDER

TermoPlex 50 PTFE

	ALUMINUM COMPLEX gives the lubricant operability in the presence of seawater, a high degree of protection against oxidation and corrosion, 100% protection from dust and dirt, resistance to thermal, structural and oxidative destruction, colloidal stability
	PTFE prevents "sticking" of metallic and non-metallic friction pairs, protects fluoroplastic components from premature wear
	SYNTHETIC BASE OIL higher oxidative stability, longer service life, low evaporation compared to mineral oils
	THERMAL REVERSIBILITY complete restoration of the properties of the lubricant after repeated overcoming of the drop-off temperature and subsequent cooling
	WATER RESISTANCE is not washed off by a hot water jet (loss of less than 3% at 79° C), is not afraid of seawater
	HIGH ADHESION prevents the grease from draining off the surfaces, keeps the grease in the lubrication zones for a long time

• oxidation and corrosion protect
• minimum grease consumption
• loads resistance
• contamination resistance
• optimized for operation in winter, in transition and summer periods, we recommend using TERMOPLEX 460PTFE grease.

Operating temperature range -45.. +160⁰С

Product application


rolling and sliding bearings	telescopic systems	ropes and cables

TermoPlex 50 PTFE lubricant is recommended for lubrication of sliding pairs of steel-fluoroplast telescopic booms of mobile cranes, manipulators and loaders, plastic bearings mounted on rotary platforms of cranes, is also applicable for processing the outer surface of ropes, protecting steel cables, lubrication of sliding guides, sliding bearings and rolling bearings operating in harsh conditions (vibration, the presence of dust, water , etc.).

Ingredients

Synthetic oil, thickener aluminum complex, PTFE, white solid lubricants, extreme pressure (EP), anti-wear (AW), antioxidant and anticorrosive additives

Type of packaging

Cartridges 0.37 kg
Bucket 18 kg
Barrel 180 kg

Environment protection and safety

The products of ARGO company at usual operation conditions and with the observation of personal hygiene rules are not dangerous for health. The product is not highly inflammable and not toxic. The maximum conservation of operational qualities is achieved during storage in a cool premise in a hermetic packing. Avoid the environment pollution; do not discharge the product into sewage or waste water. For details of waste grease disposal, please contact the organizations certified in this field. For additional information, please contact the ARGO company representatives.

Characteristic	EP1	EP2
Base	Aluminium Complex
Operating temperature range, ºС	-45..+160	-45..+160
Grease Classification	MLHCF1P-45	MLHCF2P-45
Grease color	Light beige
NLGI consistency index	1	2
0.1 mm penetration	310-340	265-295
Basic oil viscosity at 40ºС, mm²/s	30-50	30-50
Drop point, ºС	220	220
Welding load, N, not less	4635	4635