Russian manufacturer of innovative industrial greases   Download catalog

Silicone Medium FT

Fully synthetic, silicone, low-temperature grease with Teflon. The lubricant is neutral to non-ferrous metals, plastics and rubber. Provides long-term protection of rubber seals.

Operating temperature range -60ºС…+200ºС

Product application

Silicone MediumFT protects rubber seals, gas and clutch drive cables, brake caliper guides, door locks, seat slides, etc.
Facilitates installation and disassembly.
It is especially suitable as a softening component for assembly, as a thin lubricating film to protect surfaces in the mode of boundary friction, to prevent the occurrence of tribocorrosion, to dampen oscillatory movements and vibration, as an anti-jump lubricant. The grease improves antifriction characteristics, water-repellent, protective and dielectric properties.


Product features

Fully synthetic, silicone, low-temperature grease with Teflon. The grease is neutral to non-ferrous metals, plastics and rubber. Provides long-term protection of rubber seals. Does not cause swelling of rubber. After application, it does not dry out and does not pass moisture, a PTFE microfilm is formed on the surface of the friction pairs, thanks to which the service life of parts and mechanisms increases several times, noise and vibration are significantly reduced.

Type of packaging

Cartridges 0.37 kg
Bucket 18 kg
Barrel 180 kg


 

Environment protection and safety

The products of ARGO company at usual operation conditions and with the observation of personal hygiene rules are not dangerous for health. The product is not highly inflammable and not toxic. The maximum conservation of operational qualities is achieved during storage in a cool premise in a hermetic packing. Avoid the environment pollution; do not discharge the product into sewage or waste water. For details of waste grease disposal, please contact the organizations certified in this field. For additional information, please contact the ARGO company representatives.

Characteristic

Method

Silicone Medium

Silicone Medium

Grease colour

Visually

Creamy white

Creamy white

Thickener

-

Li-Complex

Li-Complex

Base

-

Polydimethylsiloxane

Polydimethylsiloxane

Solid lubricating additives - PTFE PTFE

Operating temperature range, ºС

-

-60..+200

-50..+200

Grease classification

DIN 51 502

MSiF1S-60

MSiF1S-50

NLGI consistency index

DIN 51818

1

2

0.1 mm penetration

ГОСТ 5346

310-340

265-295

Basic oil viscosity at 40ºС, mm2/s

DIN 51 562

54

54

Kinematic viscosity of the base oil at 100 °C

DIN 51 562

6.5

6.5

Drop point, ºС

ГОСТ 6793

≥220

≥220

 
--!>

FOUND OUT MORE

Silicone Medium
Silicone Medium

Silicone frost- and heat-resistant grease, suitable for use in friction units of precise mechanisms

Read more
Silicone Medium FT
Silicone Medium FT

Silicone frost- and heat-resistant grease, suitable for use in friction units of precise mechanisms

Read more
Silicone H2FT Paste
Silicone H2FT Paste

Premium high temperature Silicone Paste with teflon

Read more
Яндекс.Метрика
Contact form

Заказать Silicone Medium FT